Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Henderson?
Panel replacement in Henderson typically runs $250 to $500 for a single residential garage door panel, including the panel itself and labor. Most jobs fall in the $320 to $420 range for a standard 16-foot steel door section. The job is usually done same-day once the panel is in stock, and it’s almost always cheaper than replacing the entire door.
That’s the short answer. Below we break down exactly where that money goes, what pushes the price higher or lower, and how to know whether a panel replacement is worth doing in the first place.
Key Takeaways:
- Single panel replacement in Henderson: $250 – $500 all-in
- Material is usually 40 – 60% of the job; labor makes up the rest
- Door brand, panel size, insulation, and color match affect price
- Multi-panel replacement is often priced per panel, with a slight discount on labor
- If the door is 15+ years old, replacement may cost less per year of remaining life
Panel Replacement Cost Breakdown (2026)
Here’s how a typical Henderson panel replacement invoice breaks down. These are the numbers we quote in the field, and they hold across most of the valley: Green Valley Ranch to Anthem, Inspirada to Lake Las Vegas.
| Line Item | Typical Range | Notes |
|---|---|---|
| Single steel panel (16 ft door) | $150 – $310 | Varies by brand and insulation rating |
| Labor (removal + reinstall) | $100 – $190 | Includes hinge and roller reattachment |
| Weather seal replacement | $15 – $45 | Often needed when a panel is replaced |
| Color match / custom finish | $20 – $80 | Factory color match on brands like Clopay and Amarr |
| Total | $250 – $500 | Most common: $320 – $420 |
A few things move that number. Brand matters: a Clopay or Amarr factory-ordered panel runs higher than a generic steel section because the color and embossing are matched to your existing door. Insulation matters: Henderson garages absorb brutal summer heat, and an insulated panel (polystyrene or polyurethane core) costs $40 to $80 more than a hollow steel section. Door height matters: an 8-foot door panel costs more than a 7-foot section simply because there’s more material.
What about a full panel replacement in Henderson across multiple sections? If two or three panels are dented from a single impact, the per-panel material cost usually stays the same, but labor drops to $60 – $110 per panel after the first one since the tech is already set up. We quote multi-panel jobs as a single line so you see the total before any work begins.
When a Panel Replacement Costs More Than Expected
Three scenarios push the number toward or past the top of the range:
- Custom windows or decorative inserts: If your panels have glass lites, the replacement section must be ordered with matching cutouts. That adds 20 – 40% to the panel cost.
- Older doors (pre-2005): Some manufacturers changed panel profiles over the years. An older door may require a custom-rolled panel, which costs more than a current-production section.
- Structural damage behind the panel: If the stile (the vertical frame piece inside the panel) is bent, replacing the skin alone won’t work. The full panel assembly must come out.
What Affects Panel Replacement Pricing in Henderson
- Door brand and availability: Wayne Dalton and Raynor panels are often special-order in Henderson, and special orders cost more than stocked Clopay or Amarr sections. Lead time also matters: a stocked panel might be $280, while the same-size special-order section runs $340 plus a week of waiting.
- Panel material and gauge: 24-gauge steel is the standard. 26-gauge thinner panels cost less but dent more easily. Aluminum panels from brands like Wayne Dalton’s 9100 series run on the lower end of the range.
- Insulation rating: Non-insulated panels are cheapest. Polystyrene-insulated panels (R-6 to R-9) are mid-range. Polyurethane-injected panels (R-12 to R-18) run at the top end. In Henderson’s summer heat, an insulated panel also keeps the garage noticeably cooler, which many homeowners in Anthem and Seven Hills care about when the garage doubles as a workspace.
- Finish and color matching: Factory color matching through Clopay or Amarr costs $20 to $80 extra. If your door is a custom color or has a woodgrain texture, the finish charge lands higher.
- Labor complexity: A panel on the bottom section of a double-door requires more disassembly because you’re working around the cable and bottom bracket. A top-section panel is faster. The difference is usually $30 to $60 in labor.
- Time of year: Henderson sees a spike in panel damage during monsoon season (July through September) when wind-thrown debris dents doors. Demand pushes labor rates toward the upper end of the range during those months, though we keep our written pricing consistent year-round.
How to Save on Panel Replacement
Panel replacement is one of the few garage door repairs where you have real control over the final number. Here’s where the savings actually come from.
- Replace the panel, not the door: A new single door runs $700 to $2,200 installed. A panel replacement at $250 to $500 keeps your existing door in service. If the door is under 12 years old and the hardware is sound, the panel route wins every time on cost.
- Ask for a written quote before work starts: Every Brock Garage Doors Henderson job includes a written price handed to you before a single bolt is removed. If a competitor won’t put it in writing, don’t sign anything.
- Bundle small repairs at the same visit: If you have a worn roller or a tired weather seal along with a dented panel, doing them in the same visit saves the second truck roll. Materials stay the same price; labor is where you save.
- Check your warranty coverage: Some Clopay and Amarr warranties cover panel defects for a limited period. Impact damage from a car bumper or monsoon debris won’t be covered, but manufacturing defects are worth checking before you pay out of pocket.
- Get a free estimate by phone: Call (775) 458-8864 and describe the door brand, size, and damage. A live person answers, and we’ll give you a ballpark over the phone so you can decide if a site visit is worth your time. Estimates are free, and the phone quote never becomes a bait-and-switch at the door.
Panel Replacement vs. Full Door Replacement: Which Costs Less?
The math is straightforward: if your door is newer than 12 years and the track, springs, and opener are in good shape, panel replacement at $250 to $500 beats a new door at $1,200 to $2,000 every time. If the door is 15+ years old, rusting at the hinges, and the springs have already been replaced once, the replacement panel buys you a few more years at most.
Here’s the honest way we frame it for Henderson homeowners: take the panel replacement cost and divide it by the years you expect the door to last. A $400 panel on a 10-year-old door that runs another 8 years costs $50 per year. A $1,600 new door that runs 20 years costs $80 per year. You can see why the panel often wins.
But if you’re looking at a $400 panel plus a $200 spring replacement plus a $150 opener repair, the whole picture changes. At that point, a new door installation may pencil out better. We’ll walk through the numbers with you on the phone before anyone gets in a truck.
How the Panel Replacement Process Works
Here’s what to expect when Brock Garage Doors Henderson replaces a panel, step by step.
- Phone estimate: Call (775) 458-8864. A live person answers, asks about the door brand, size, panel location, and damage. You get a ballpark range right then.
- Site visit and written quote: A background-checked, uniformed tech arrives inside the scheduled window, measures the door, confirms the panel type, and hands you a written price. That number is the number. It does not change at the end of the job.
- Panel order or confirmation: If the panel is stocked locally, the tech proceeds same-day. If it’s a special order, we give you the lead time in writing and schedule the install when the panel arrives.
- Removal: The tech disconnects the opener, secures the door, removes the damaged panel from the section joint, and disconnects the hinges and rollers.
- Installation: The new panel is set in place, hinges and rollers are reattached, and the section is aligned with the track.
- Balance and test: The door is cycled open and closed three times, the spring tension is checked, and the sound is compared to the other sections.
- Cleanup and walkthrough: The work area is swept, the old panel is hauled off, and the tech walks you through the repair. Your written 365-day guarantee is provided before the tech leaves.
Why Panel Damage Happens in Henderson
Henderson panel damage follows a predictable pattern. We see the same three causes week after week:
- Monsoon wind debris: July through September brings 40 – 60 mph gusts. Potted plants, patio furniture, and construction debris turn into projectiles. A dented bottom panel is the most common result.
- Vehicle contact: In tighter Henderson garages and alley-loaded communities like parts of Inspirada, a bumper tap into the bottom section is common. The panel absorbs the hit; the track rarely suffers.
- Kids and sports equipment: Basketballs, soccer balls, and bikes take a toll on lower panels. A ball strike usually leaves a shallow dent that doesn’t affect operation, but enough of them can compromise the panel’s rigidity over time.
The good news: panel damage almost never means the door is unsafe to operate. The door still goes up and down. But a dented panel does trap air at the section joint, which can cause uneven closing pressure on the bottom seal. Fixing it is a matter of energy efficiency, appearance, and long-term door health more than immediate safety.
FAQs – Panel Replacement Cost
How much does it cost to replace one garage door panel in Henderson?
One panel replacement in Henderson runs $250 to $500 including labor and materials. Most single-panel jobs land at $320 to $420 for a standard steel door section. Call (775) 458-8864 for an exact quote; estimates are free and a live person answers around the clock.
Is it cheaper to replace the panel or the whole door?
Panel replacement at $250 to $500 is almost always cheaper than a new door at $700 to $2,200. The exception is a door 15 years or older with worn hardware: at that age, a new door often delivers better cost per remaining year of life.
Can you match my existing panel color?
Yes. Factory color matching through Clopay and Amarr runs $20 to $80 extra and gets you a panel that matches the rest of the door. Older doors with sun fading may show a slight color difference; we’ll tell you before you pay whether a perfect match is realistic.
How long does a panel replacement take?
A single panel replacement takes 60 to 90 minutes on site once the panel is available. Stocked panels can be installed same-day in most Henderson neighborhoods. Special orders add lead time, which we confirm in writing before you commit.
Do you offer a guarantee on panel replacement?
Yes. Every panel replacement from Brock Garage Doors Henderson includes a 365-day written guarantee. If the panel fails or the repair doesn’t hold within a full year, we return and make it right at no charge. Call (775) 458-8864 and we’ll put the details in writing before any work starts.
Written by Wade Mercer, Owner at Brock Garage Doors Henderson, serving Henderson and the surrounding valley. Pricing reflects the Henderson market as of 2026. Brock Garage Doors Henderson offers free estimates – call (775) 458-8864.
What Our Customers Say
"Disciplined and polite. He did a full checklist on the door before leaving, even things I hadn't called about."
- Melody B."Door stuck open with a snapped cable. Tech was squared away, explained what happened, and fixed it in under an hour. Price was what he said it would be."
- Cynthia M."Found out the owner and a couple of the techs are veterans, and you can tell. Showed up exactly on time, in uniform, and did the job without wasted motion. Replaced a broken spring and a frayed cable."
- Ray D.